AviTrader sponsorship ad

Exclusive interview: “Value propositions create opportunities for part outs” [MRO Editorial] Open the MRO Magazine - April 2023 Edition

Lee Carey, Vice President, Asset Management at EirTrade Aviation
Lee Carey, Vice President, Asset Management at EirTrade Aviation

AviTrader´s Keith Mwanalushi speaks to Lee Carey, Vice President, Asset Management at EirTrade Aviation about the first disassembly of the Boeing 787 and the market trends for used serviceable materials for newer aircraft.

In February, Dublin-based EirTrade Aviation unveiled the first known disassembly of the Boeing 787 – two 10-year-old aircraft have been disassembled simultaneously off-site, with parts expected to be available by the time of this publication.

Online sources have suggested the B787s were previously in storage and operated by Norwegian.

The first two 787-8s to be retired marked a milestone for the industry but are not entirely surprising considering the market shocks that have hit the aviation industry in the last few years. For the B787, Lee Carey Vice President, Asset Management at EirTrade says the value proposition and supplying the market with more options for used serviceable materials (USM) were the key factors in deciding to pursue the project.

“The driver of those aircraft going into teardown was very much to do with the value proposition in terms of part out, and the value of those aircraft as a teardown versus other alternatives like putting the aircraft back into service,” he tells AviTrader MRO.  

Carey believes some of the reasons the value proposition is so strong is the timing relating to the first deliveries of the B787-8 aircraft which are expected to go in for the first 12-year heavy checks this year, same as the overhaul interval on the landing gear which is also at 12 years and lined up with the heavy maintenance checks. These factors will likely create significant opportunities for material consumption for the market.

Obviously, the B787s are still new aircraft, so there is very little used serviceable material on the market and EirTrade project a significant amount of demand for material coming down the pipeline because of the lack of material and supply chain issues. “Many operators don’t have much option over the supply of new material now, there is perhaps some serviceable material that is being supplied by the OEMs currently through exchange programmes. So, this is the first large source of independent material for the 787s that is available and will hopefully contribute towards reducing maintenance events somewhat for those aircraft owners,” he anticipates.

Carey is mindful that the disassembly of just two aircraft will not make a huge overall impact in terms of supporting the demand for B787 material, but it’s certainly a start. He says issues around the supply chain with new material will only increase the demand for the USM coming off these aircraft.

Aircraft OEMs will tend to keep a strong grip on spares and pricing especially where there is limited supply so EirTrade will be studying this closely. “Currently we are just entering the market and our strategy is to discount what is currently available for operators to give a more economical solution for their maintenance events.”

Carey adds that the company is keen to establish itself as the leader in terms of serviceable material for the B787. 

Back in February 2020 EirTrade took delivery of an A380 aircraft for part out following the Covid crisis that saw them enter early retirement. Several operators have now returned their A380s back to service. “We disassembled the Ex. Air France A380 aircraft but I think that aircraft is a very different product and the B787 will have a very different lifecycle.”.

While a lot of operators have brought the A380 back, many in the industry question how long they will continue operating them and besides the big flag carriers in the Middle East, it’s hard to see those flying for a long period of time.

Carey comments: “But with those aircraft going back into service, we have seen an uptick in demand for that material, however they are two very different products and we see them entering a tear down process for very different reasons.”

In terms of feedstock supply for future B787 disassembles Carey indicates that EirTrade will continue to examine  future opportunities to acquire more B787 aircraft. “I think it’s a case of having to identify a unique scenario where the value proposition makes sense and certainly it’s something we are looking at because we want to cement ourselves as the USM market leader on the Boeing 787.” Despite the demand, Carey acknowledges that future acquisitions may not be easy to come by.

Over the last several months EirTrade have worked on building relationships with shops that might have repair capability on this aircraft and Carey reports that things are looking positive. “We are very excited to be the first to market with the B787 following our involvement with the first A380s to go to tear down and we were one of the first companies to disassemble the CFM56-7BE so we are no strangers to being the first to market on a product.”

EirTrade has been ramping up its aircraft disassembly activities at its facility in Knock, Ireland West, focusing on Airbus and Boeing aircraft. Carey, believes that the company’s proven track record and global network were pivotal in securing the B787 deal and says the targeted relationships with airlines, MROs and OEMs on the B787 platform were crucial to securing this project and maximising the value of the two aircraft.

Share this Article
Wednesday April 29, 2026
Liebherr team with nose landing gear for the A350F © Liebherr Aerospace
Liebherr-Aerospace has delivered its first nose landing gear for the Airbus A350F freighter, extending a partnership with Airbus that spans more than five decades. The company has been a core programme partner since the launch of the A350, providing critical f... Read More »
Wednesday April 29, 2026
Safran Aircraft Engines and Uni Tritech have signed an MoU to manufacture LEAP engine components in India
Safran Aircraft Engines has signed a memorandum of understanding with Uni Tritech Private Limited (Uni Tritech), part of the Neterwala Group, to manufacture components for the CFM LEAP engine programme, marking a significant step in strengthening its global su... Read More »
Wednesday April 29, 2026
Matthew J. Koscal
Republic Airways has announced that its Board of Directors has unanimously appointed Matthew J. Koscal as President and Chief Executive Officer (CEO), effective June 15, 2026. Koscal, who joined the airline in 2014 and has served as President and Chief Commerc... Read More »
Wednesday April 29, 2026
Do228NXT © GA-ATS
General Atomics AeroTec Systems (GA-ATS) has reported that ground tests of the first Do228NXT have successfully begun last week, marking an important step forward in the development of the new aircraft series. The programme now advances to engine testing, a cr... Read More »
Wednesday April 29, 2026
A220 aircraft © Airbus
Airbus reported weaker first-quarter 2026 financial results, reflecting a drop in commercial aircraft deliveries, although its Defence and Space division delivered a robust performance. Chief Executive Guillaume Faury highlighted a challenging and fluid operat... Read More »
Wednesday April 29, 2026
Copa Airlines has opted for the Boeing 737 MAX to expand its fleet © Boeing
Panamanian carrier Copa Airlines has ordered 40 737 MAX aircraft. Under the agreement, Copa Airlines also holds options to acquire up to 20 additional aircraft from the single-aisle family. Copa Airlines Chief Executive Pedro Heilbron and Boeing Commercial Air... Read More »
Tuesday April 28, 2026
The Norwegian Group has delivered significantly improved Q1 results
The Norwegian Group (Norwegian) has reported a strong set of results for the first quarter (Q1) of 2026, traditionally the weakest period of the year. The airline achieved a record first-quarter load factor of 87.6%, significantly reduced its operating losses ... Read More »
Tuesday April 28, 2026
Latest generation landing gear © APOC Aviation
APOC Aviation (APOC) has acquired a ‘zero cycles since new’ SAFRAN landing gear for the A321 EV, compatible with Airbus’ new engine option (NEO) fleet. The addition reinforces APOC’s position as one of Europe’s leading independent landing gear provid... Read More »
Tuesday April 28, 2026
Embraer E195-E2 'Tech Eagle'
Embraer recorded a backlog of US$32.1 billion in the first quarter of 2026 (1Q26), marking its sixth consecutive all-time high. The company delivered 44 aircraft across all business units during the quarter, a 47% increase compared with 30 deliveries in 1Q25, ... Read More »
Tuesday April 28, 2026
The first operational U.S. Navy MQ-25A Stingray soars over southern Illinois during a successful two-hour first flight
Boeing and the US Navy have successfully completed the first test flight of an operational MQ-25A Stingray™, marking an important step towards aircraft carrier deployment and signalling a new phase in naval aviation. During the two-hour sortie, the unmanned ... Read More »
Tuesday April 28, 2026
Donal O'Shea will lead the new office in Manila
ABL Aviation has opened a new technical office in Manila, reinforcing its presence in the Asia-Pacific region as airline demand continues to recover despite ongoing aircraft supply constraints. The facility will operate as a dedicated technical hub, supporting... Read More »
Tuesday April 28, 2026
Ribbon-cutting ceremony to officially open Rolls-Royce's new Additive Manufacturing (AM) Development Cell in Bristol, UK
Rolls-Royce has opened a new Additive Manufacturing (AM) Development Cell at its Defence Assembly and Operations facility in Bristol, UK. Funded by the UK Ministry of Defence, the cell uses advanced additive manufacturing technology to produce critical compone... Read More »
Monday April 27, 2026
Air Nostrum ATR 72-600 aircraft AirTeamImages
ATR and Air Nostrum Engineering & Maintenance Operations (ANEM), the maintenance arm of Spanish regional airline Air Nostrum and Mel Air, have agreed a further five-year extension to their global maintenance agreement (GMA). The renewal represents another ... Read More »
Monday April 27, 2026
3Top has acquired three former easyJet Airbus A319-100 aircraft © AirTeamImages
3TOP Aviation Services (3TOP), a global provider of aftermarket support and asset management, has acquired three ex-easyJet Airbus A319-100 aircraft (MSN 4425, 4427 and 4444). The aircraft are powered by CFM56-5B5/3 engines with low cycle utilisation following... Read More »
Monday April 27, 2026
At MRO Americas, William Ampofo, SVP Parts & Distribution and Supply Chain for Boeing Global Services (l) and Brian Sartain, COO for Ontic (r) © Boeing
Boeing and Ontic have announced a new distribution agreement at MRO Americas to supply Grimes engine valves to commercial airlines worldwide. The collaboration brings together Boeing Distribution’s extensive global network with Ontic’s expertise in critica... Read More »
Monday April 27, 2026
CFM56 engine © CFMI
Avora Aviation, a specialist in aircraft and engine asset management, trading and leasing, has completed a sale-and-purchase agreement with Setna iO for two CFM56-5B4/3 engines. Previously part of Avora Aviation’s portfolio, the engines are set for teardown,... Read More »
Monday April 27, 2026
Facility opening in Germany Claudia Höhne / Safran
Safran Helicopter Engines has opened a new facility in Norderstedt (Schleswig-Holstein), near Hamburg, Germany. The 3,000m2 site is dedicated to the support, maintenance and repair of helicopter engines, strengthening the company’s ability to meet growing de... Read More »
Monday April 27, 2026
First Airbus A321XLR for Air Canada taking off in Hambur
The first of 30 Airbus A321XLR aircraft for Canada’s flag carrier, Air Canada, has been delivered. The aircraft is leased from SMBC Aviation Capital. This delivery marks a key milestone in the airline’s fleet renewal strategy, enabling it to bridge the gap... Read More »
Friday April 24, 2026
Pratt & Whitney invests US$100 million to increase production capacity at its facility in, Rzeszow, Poland © Pratt & Whitney
Pratt & Whitney, an RTX business, is investing US$100 million in its Rzeszów facility in Poland to expand production capacity, introduce advanced manufacturing capabilities and meet rising global demand for its commercial and military engines, including t... Read More »
Friday April 24, 2026
Representatives from Barfield and AerFin at the contract signing
Barfield, a subsidiary of Air France Industries KLM Engineering & Maintenance (AFI KLM E&M) in the Americas, has signed a three-year component repair and overhaul agreement with AerFin, an aviation asset specialist that buys, sells, leases and repairs ... Read More »

2026 MEDIA KIT

VP Sales & Business Development Americas
Tamar Jorssen
tamar.jorssen@avitrader.com
Phone: +1 (778) 213 8543
VP International Sales & Marketing
Malte Tamm
malte.tamm@avitrader.com
Phone: +49 (0)162 8263049

Subscribe to the most widely accepted news source in the aviation industry!


Free daily, weekly and monthly MRO publications delivered straight to your inbox!
News Alerts, Editorials, Marketplace, Expert Corner, Executive Interviews and more ...

Select publications:

*We respect your privacy and AviTrader will not share your email address with any third parties.